Outdoor Barrel Sauna / BS13

BS13 6-8 Person Outdoor Barrel Sauna

Conçu pour les projets qualifiés de vente en gros, OEM et commerciaux

BS13 is the largest marketed-capacity model in HACHILL’s current barrel sauna range. The supplied product record lists an approximately 2,000 mm diameter, 2,400 mm depth and an 8 kW recommended heater route. Confirm the exact bench layout, site conditions, electrical package and included components before quotation.

Spécifications en un coup d'œil

Caractéristique

Détail

Modèle

BS13

Type de produit

Sauna tonneau extérieur

Capacité commerciale

6-8 people

Recommended Heater Route

8 kW

Dimensions

Approx. Ø2000 × D2400 mm; final approved drawing controls

Matériaux et composants

Confirmer avec la spécification et le devis approuvés

Circuit d'approvisionnement

Vente en gros / OEM / Projet commercial

Notes de conception et d'approvisionnement

Adaptation au site

Confirmer l'accès, les conditions de fondation ou de sol, les services publics, le drainage et le dégagement pour l'entretien.

Configuration

Approuver la disposition exacte, la finition visible, les composants et les accessoires inclus pour la commande.

Preuve

Utiliser le dessin final, la spécification, le devis et les documents du marché de destination comme enregistrement contrôlé.

Matériaux contrôlés

Parcours système défini

Planification de projet

Preuves avant commande

Who BS13 Is Designed For

BS13 is a commercial-investigation page for distributors, sauna brands and wellness projects comparing a higher-capacity outdoor barrel format. The useful starting point is not the capacity label alone: review the real seating plan, finished footprint, access route, foundation, drainage, outdoor exposure and approved heater package as one system.

The photographs show one BS13 sample. Components and visible details shown in an image are not automatically included in every quotation; the approved quotation and model record control the final supply scope.

Vente en gros

Use BS13 as a range-position candidate after confirming the market, expected configuration and required evidence.

OEM / Marque de distributeur

Define branding, visible finish, packaging and document requirements before option feasibility is confirmed.

Projets commerciaux

Coordinate site access, base preparation, heater/electrical responsibility and handoff requirements before order approval.

Not Yet Confirmed

Les matériaux, certifications, accessoires inclus, emballages, MOQ, délais de livraison et garanties restent des champs contrôlés par le devis.

Confirmed BS13 Specifications

These values come from the supplied BS13 product sheet and dimension drawing. Treat dimensions as approximate planning inputs until the final approved drawing and order configuration are issued.

Modèle

BS13 outdoor barrel sauna.

Capacité commerciale

6-8 people. Validate against the approved internal bench layout and intended user flow.

External Dimensions

Approximately Ø2000 × D2400 mm. Allow additional site space for access, drainage and installation clearances.

Internal Dimensions

Approximately Ø1920 × D2184 mm. Confirm the final drawing before planning usable seating or equipment placement.

Recommended Heater

8 kW route. Heater model, controls, voltage, frequency and local electrical responsibility require confirmation.

Limite de vérification

Confirm the model record, image set, commercial scope and destination-market requirements before quotation.

BS13 Exterior and Interior Views

Use these views to evaluate the photographed unit’s form, entry, seating and control placement. Final production scope must match the approved quotation and drawing.

Exterior view

Front three-quarter view showing the circular body, glazed entry and exterior finish.

Rear construction

Rear view for reviewing the barrel profile and exterior cladding coverage.

Bench layout

Interior view showing the seating arrangement and illuminated backrest area.

Controls and lighting

Close view of the installed control panel and bench lighting shown on this sample.

Dimensions and Site Planning

The supplied drawing indicates an external diameter of about 2,000 mm and depth of about 2,400 mm, with an internal width of about 1,920 mm and internal depth of about 2,184 mm.

Do not size the prepared site from the product envelope alone. The project team must also confirm delivery access, base construction, drainage, door swing, heater clearances, ventilation assumptions and service access for the selected destination market.

Product Details to Review

Close-up images are useful for technical and receiving discussions, but they do not replace a controlled bill of materials, approved drawing or written inclusion list.

Glass door and handle

Inspect the entry geometry and handle arrangement; final glazing and hardware scope must be stated in the quotation.

Exterior cladding detail

Review the visible black exterior finish and joint treatment shown on this photographed unit.

Door seal and latch

Confirm door sealing, latch hardware and adjustment during model approval and receiving inspection.

What Must Be Confirmed Before Ordering

Configuration du produit

Approve the material specification, glazing, hardware, bench layout, finish, heater package, controls and included accessories for the exact order.

Installation Scope

Confirm foundation, drainage, assembly, electrical supply, ventilation, clearances, commissioning and local installer responsibilities.

Commercial and Evidence Scope

Confirm quantity, branding, packaging, loading basis, lead time, warranty and the exact documents required for the destination market.

BS13 Product FAQ

How many people is the BS13 barrel sauna designed for?

The supplied product record markets BS13 for 6-8 people. Confirm the approved bench layout and intended user flow before applying that capacity to a commercial venue or project.

Quelles sont les dimensions du BS13 ?

The supplied drawing shows approximately Ø2000 × D2400 mm externally and Ø1920 × D2184 mm internally. Use the final approved drawing for site preparation and allow for access, drainage, clearances and servicing.

Quel poêle est recommandé pour le modèle BS13 ?

La fiche fournie indique une puissance de chauffage recommandée de 8 kW. Le poêle exact, les commandes, la tension, la fréquence, les distances de sécurité et les travaux électriques locaux doivent être confirmés pour le marché de destination.

Les matériaux et accessoires présentés sur les photos sont-ils inclus ?

Not automatically. The photos document one photographed unit. Materials, visible finish, hardware, controls, lighting and accessories are included only when stated in the approved quotation and model record.

Can BS13 be supplied for OEM or private-label programs?

OEM feasibility can be reviewed from a brief covering branding, finish, components, packaging, quantity, destination market and required documents. No option is confirmed until it appears in the quotation.

What information is needed for a BS13 quotation?

Provide the destination market, intended application, site conditions, quantity, branding, heater and electrical requirements, required documents, packaging, installation responsibility and target delivery window.

Request a Qualified BS13 Quotation

Send your destination market, intended application, site conditions, order quantity, branding, heater/electrical requirements, documentation needs and installation responsibility. HACHILL will confirm the model-specific scope before quotation.

Demandes de projet