Compare HACHILL’s three Laydown cold plunge models by footprint, external height, material and the type of installation planning each model requires.
CT16 is the compact Thermowood + 304SS option at L1350 × W650 × H750 mm. CT20 uses 304 Edelstahl and a lower H610 mm external height. CT26 increases the envelope to L1830 × W750 × H850 mm, combines Thermo Spruce + 304SS and includes a Schritt in der aufgeführten Ausführung.
All three models are designed for use with an external cooling system.
Konzipiert für: Vertriebspartner, Recovery-Marken, Fitnessstudios, Spas, Wellness-Einrichtungen und gewerbliche Projekte, die ein Kaltwasser-Tauchbecken in Liegeausführung prüfen.
Start with the model difference that matters most to the project: CT16 for compact Thermowood placement, CT20 for lower-profile stainless geometry, or CT26 for a larger Thermowood envelope with a listed Step.
L1350 × W650 × H750 mm · Thermo Spruce + 304SS
Compact Laydown option for projects where delivery access, turning space and final placement are major constraints.
L1500 × W700 × H610 mm · 304 Stainless Steel
Lower-profile stainless Laydown option where entry arrangement and internal geometry are stronger decision points.
L1830 × W750 × H850 mm · Thermo Spruce + 304SS · Step
Larger Thermowood Laydown option where Step placement, surrounding access and the visible service area need to fit the installation.
The three models share a Laydown body format, but their dimensions, material direction and model-specific planning needs are different.
| Vergleich | CT16 | CT20 | CT26 |
|---|---|---|---|
| Format | Liegeausführung | Liegeausführung | Liegeausführung |
| Außenmaße | L1350 × W650 × H750 mm | L1500 × W700 × H610 mm | L1830 × W750 × H850 mm |
| Innenmaße | L1260 × W560 × H600 mm | L1430 × W630 × H530 mm | L1086 × W666 × H750 mm |
| Material | Thermo-Fichte + 304SS | 304 Edelstahl | Thermo-Fichte + 304SS |
| Schritt | Nicht in der Ausstattung aufgeführt | Nicht in der Ausstattung aufgeführt | Aufgeführt |
| Hauptentscheidung | Compact delivery & placement | Lower-profile geometry & entry | Larger envelope, Step & service access |
| Kühlung | Externes Kühlsystem | Externes Kühlsystem | Externes Kühlsystem |
Start with CT16 when compact Thermowood placement is the priority. Start with CT20 when stainless construction and lower external height matter more. Start with CT26 when the larger Thermowood layout and listed Step fit the project.
Each Laydown model changes a different part of the installation decision, so compare the relevant constraint instead of treating the three tubs as simple size variants.
Review doorway width, access path, corridor or turning space, final orientation and surrounding placement area when the compact CT16 is the leading option.
CT20 shifts the decision toward its H610 mm external height, intended entry side and L1430 × W630 × H530 mm internal geometry.
CT26 combines a larger external envelope with a listed Step and visible service area. Include Step position, entry, connection access and practical service-side space in the layout.
CT16, CT20 and CT26 all provide inlet, outlet and drain connections and are designed for use with an external cooling system. Plan the tub, drainage and supporting cooling equipment together within the available installation area.
Coordinate the selected tub position with inlet and outlet connections, nearby fixed construction and the proposed location of the external cooling equipment.
Beziehen Sie den Entleerungsanschluss in das Standortlayout ein und halten Sie den Entwässerungsweg für die gewählte Nassbereichsanordnung praxisgerecht.
The external cooling equipment needs its own suitable location in addition to the tub footprint. Cooling temperature and performance depend on the selected external cooling and water-system configuration.
Start with CT16 when a smaller Laydown footprint, Thermo Spruce + 304SS and delivery or turning constraints are the main project priorities.
Start with CT20 when 304 Stainless Steel, the H610 mm external profile and entry/internal geometry are stronger decision factors.
Start with CT26 when the larger external envelope fits, Thermo Spruce + 304SS is preferred and the listed Step and service area can be incorporated into the layout.
Still deciding between Laydown and Upright? Return to the Kaltwasserbecken range before choosing a model. You can also review Aufrechte Kaltwasserbecken or compare Thermowood-Kaltwasserbecken across body formats.
Send the project information needed to compare CT16, CT20 and CT26 or prepare a quotation for the selected model.
For OEM or order-specific requirements, you can also review OEM-Fertigung und Qualitätskontrolle & Inspektion.
Use these resources after narrowing the tub choice when the project needs more detail on Laydown selection, external cooling-system matching or drainage planning.
Review the main considerations when comparing longer horizontal cold-plunge tub configurations for a project.
Review how the selected tub and external cooling equipment need to work together as one project configuration.
Review drainage and surrounding wet-area considerations for a Laydown cold-plunge installation.
